This is zoom zoom on its way to the SVA testing station

These are the mods we have done to pass SVA.

We have fitted a panel made of carbon fiber to cover the rear of the car so the tester cannot see or touch the sharp edges inside the boot.

Also we covered the exhaust with edge trim and just hope it stays on as this gets very hot.

Iggy fitted the digidash to the car and also the steering wheel, gear lever and all the trim.

Gasket also fitted the pedals as he's small and very bendy and can get into the pedal box easily.

We have had some late nights to get the car ready for its sva test.

All the wireing was done by spencer and we now have head lights, indicators,hazards etc.

I fitted the rad, rad fan and the nose cone to the car and together we fitted the bonnet with the cut-out for the exhaust.

Hi just to bring you all upto date with progress so far....

We had a rush to finish the car as the test we have to take to register the car for use on the road is changing, and we wanted to test under the ''old rules'' as this is the standard we have built the car to.

So we have fitted the rear wings to the car and also fitted the rear lamps.

The seats and seat belts were also fitted alond with the dash and all the wiring.
The front nose and front wings are also on with the front lights.

This is our car at the sva centre for its test!!